POLYESTER MEMBRANE
These membranes, are a rigid form of structure - using polyester resin and fibreglass mesh as the reinforcement.
The polyester is a two part system based on a resin formed from an acid anhydride,
The resin is mixed with a peroxide catalyst to cause the resin to harden.
The end result is a fabricated sheet that is built to last
This resin is used for rapid production of fibreglass pools, car parts, yotts, tanks ANd any other product that requires diversified resistance to the elements.
Polyester forms a hard and impermeable surface which is chemically inert.
Trained and licenced technical operators can achieve interlaminar adhesion with a high degree of strength and overall resistance.
THE WET OUT METHOD
WET OUT
SUBSTRATE
dress
SUBSTRATE
WITH FIBREGLASS
WET OUT FIBREGLASS
THE
CAULK AND BED
METHOD
CAULK JOINT WITH FLEXIBLE SEALANT
bed FIBREGLASS strip INTO SEALANT,
OVERLAP THE UPTURNED strip
WET OUT THE FIBREGLASS
SEAL IT UP WATERPROOFING
HAS PERFECTED this RELIABLE WATERPROOFING method that gives an even reinforcement.
polyester membrane exhibits rapid structural cure.
the benefit of interlaminar re-layering is
you create a high standard of seamless waterproofing.
encapsulating the entire room
before installing additional diverters is our signature method, we use with thermosetting material that has complete interlaminar adhesion with itself.
we reinforce the angle on top of our cured rigid flexible membrane.
. . . . .
COMMON OCCURRENCE THAT CAN BE NOTICED IN bathroom
DOOR THRESHOLDS AND SHOWER zoned AREAS THAT ARE LEAKING.
junctions connected TO THE ADJOINING ANGLE
ACCUMULATE MOISTURE.
THE INCOMPATIBLE PRODUCts are rapidly attacked.
A METAL surfaces oxidize differentially to POLYURETHANE
sealant and membrane.
THE WATERPROOFING JOINTS ARE SEPARATED by moisture over time.
do not set water diverting angle in shower zoned areas before membrane.
Do not use water based membrane on bathroom floors.
WHEN INSTALLING MEMBRANE ON A BALCONY
MEMBRANE IS RETURNED TO THE TOP OF THE STEP ON THE INSIDE OF THE DOOR threshold TO PROVIDE AN UPTURN WITH THE DETAIL THAT CAN BE SEALED TO THE DOOR FRAME ONCE THE DOOR FRAME IS INSTALLED.
HOB WATER STOP TERMINATIONS THAT ARE BUILT WELL ABOVE THE DECK AREA
ARE BEST REINFORCED WITH MULTIPLE LAYERS OF WATERPROOFING TO GIVE THE ULTIMATE WATER STOP ACROSS ENCLOSED BALCONIES
Waterproof flashings SEALED TO THE STRUCTURE OF DOOR FRAMES CAN BE USED TO PREVENT AND DIVERT WIND DRIVEN WATER INGRESS FROM ADJOINING CAVITY AREAS
PAINTING OVER
POLYESTER MEMBRANE
Sanding
Cleaning
Priming
Painting